AC DC Open Frame Type Power Supply 15W
Output Current: 1.5V~3.3V5V12V15V24V48VMinimum
Output Current: 1.5V~3.3V5V12V15V24V48V
Minimum: 0 0 0 0 0 0
Maximum (3) 12 12 5 4 2.5 1.25
Maximum (4) 14 14 5.9 4.6 3 1.4
Peak (4,5) 15 15 6.5 5 3 1.5
Features:
V1 & V2 Regulated
Full Power @ Minimal V1 Load
1.5-48 VDC Out ports
2 : 1 & 4" 1 Input Ranges
-40?C Start-Up-Option
12 VDC Input Available
Input Voltage:47-63 Hz; 90-264 VAC
Power Factor: Meets EN61000-3-2
Amendment 14
Inrush Current; 115VAC:30A P-P
Input Current: 1.5A
Fusing: 2A @ 250 VAC On Board
Continuous Output Power: 70 Watts
Line Regulation Over Input
Range
V1-V3:
Load Regulation @ 60% 0% Full Load:
- V1-V2: ± 3%
- V3: ± 5% max
Cross Regulation @ 60% ±40%
Full Load:
- V1 Change in V2-V3: ± 0.5%
- V2-V3 Change in V1 @75 ±25% F/L: ± 5% max
Overvoltage Protection V1: 130% Vout type
Overshoot, All Outputs: 10% max
Power Limit: Set @120% typ
Response Time: 500 μSec
Ripple & Noise @ 20 Mhz Band
Width;
Full Load - All Outputs: 1% P-P max
Output Adjustment Range on V1: 5% min
General parameters
Efficiency 48 VDC Input: 75% typ
Switching Frequency: 60KHz typ
Operating Temperature Range: | -20 to +70?C |
Minimum Start-up Temperature: | -20?C |
Derating from 50-70?C: | 2.5%/?C |
Storage Temperature: | -40 to +85?C |
Cooling: | See datasheet |
Relative Humidity, | |
Non-Condensing: | 5-95% |
Altitude: | 10,000 ft |
EMI: | FCC Class B & VDE Class B - CISPR 22; EN 55022 Class B; EN55024 |
MTBF per MIL 217: | > 200,000 hours |
Vibration from 10-55Hz: | 1.0G Peak |